Paste fluxes for lead free soldering. Designed for PCB repair works and for soldering SMD components, especially the BGA circuits. Characterised by good wettability of soldered surfaces. Three types of fluxes are offered. The AWSLF4200TF/35 is a water based flux. The flux residues must be removed by means of washing agents on the water base. This flux is used for mounting circuits in the BGA, PGA, PLCC, QFP, CSP cases.

Flux made by Cynel, in practical container. The flux exhales nice pine fragrance. Manufacturer: Cynel. Weight: 35g

Paste fluxes for lead free soldering. Designed for PCB repair works and for soldering SMD components, especially the BGA circuits. Characterised by good wettability of soldered surfaces. Three types of fluxes are offered. The ANCLF4300TF/35 flux is designed for production processes with or without the washing phase. The flux residues must be removed by means of washing agents on the water base. Especially suitable for mounting circuits in the BGA, PGA, PLCC, QFP, CSP cases.

Condensed colophony flux, medium activity RMA conforming to MILF 14256 standard, designed for SMD mounting and repairing. May be dispensed through a screen, a stencil or form a syringe. Soldering residues are non-corrosive. But if from technological reasons a cleaning is applied, all agents designed for this purpose may be used. Corrosivity : complies with Cu mirror test Chlorides : comply with paper chromatography tes Acid value : 100 mg KOH+/-10g/1g of flux Surface resistance : > 10 8 W .

The flux markers are designed for flux precise application on solder pads. Fitted with cut-off valve, which opens after pressing the marker tip to the solder pad. This solution protects flux against drying or leaking. Recommended at soldering the BGA circuits. Capacity : 12 cm 3

Paste fluxes for lead free soldering. Designed for PCB repair works and for soldering SMD components, especially the BGA circuits. Characterised by good wettability of soldered surfaces. Three types of fluxes are offered. The ARMALF223TF/35 flux is designed for production processes with the washing phase. The flux residues must be removed by means of washing agents on the alcohol base. Especially suitable for mounting circuits in the BGA, PGA, PLCC, QFP, CSP cases.